Your position: Home > professional grade > Wire Cutter

professional grade 180 mm wire cutter bonsai tools made by 4Cr13MoV Alloy Steel from TianBonsai

Item Code: 1521979334
Sold: 29
Price:
USD
$31.00
    Please select the information you wantX
Shipping Cost:
to
Estimated Delivery Time:
Please select the country you want to ship from
+
-
Units
  • Description
Specifications
Name: wire cutter MTS- 11
Brand: TianBonsai
Quality: professional grade
Material: alloy steel (4Cr13MoV)
Overall length: 180 mm
Surface Treatment: sanding
Edge Hardness: HRC55, quenching by the high frequency coil.
Function Detail: this wire cutter, have special working cutting blade, its 2 pieces blade were excellent closed and exactly symmetrical, using this cutter to cutting the wire, would have a very clean and symmetric incision, the user can cutting the training wire follow his inclinations. if need to dismantle the wire wound on the branch, use this wire cutter, never hurt the bark and work very quickly.
Cutting Function: Cut training copper wire less than 4 mm in diameter.
Professional Grade(there is a stamp mark in the handle as above picture)
Professional Grade tools, material is 4Cr13MoV Alloy Steel, handmade by professional technicians from TianBonsai.
The 4Cr13MoV Steel, it slightly inferior to 5Cr15MoV Steel, but it also the good material for the bonsai tool, contains Molybdenom, Vanadium, 0.4% Carbon and 1.3% Chromium, after quenching treatment, it's hardness is over HRC55, high intensity, strong tenacity and wear-resistant.



Precautions for the use of bonsai tools:
1. Our tools have very sharp blades. Please pay attention to the safety of users and nearby personnel when using it. Do not arbitrarily place tools on high places. If the tool is accidentally dropped, it may cause injury to personnel and tools.
2. Choose a bonsai tool of the right size. When pruning, the diameter of the branches should not exceed the cutting limit specified by the cutter, otherwise the cutter will be easily damaged.
3. Don't use bonsai tools to trim dry branches, otherwise it is easy to damage the tool blades.
4. The fine sand particles in the flower mud will damage the blade of the tool, so when using a bonsai tool to trim branches, pay attention to whether there is dirt on the branches. If there is dirt on the branches, clean them with a small brush before pruning.
5. Pay attention to protect the tool tip, even a slight frontal collision will cause damage to the tool tip.
6. Please maintain the tools after the work is completed.

Precautions for cleaning and maintenance of bonsai cutter and scissors:
1. After the work is completed, clean the sawdust and flower mud on the surface of the tool with clean water.
2. Wipe off water stains with a clean cloth and wait for it to dry.
3. Use a small amount of general anti-rust oil to drop on the tool riveting shaft.
4. Wipe off the leaking anti-rust oil with a clean cloth.
5. Store tools indoors.
Customer Reviews
Average rating:

5(based on 42 reviews)

Share your thoughts with other customers

Product reviews can be carried out after the member login, please click here to login