EN / USD

Select Your Language / Currency

Save
Shopping Cart 0 Items 0.00
Your position: Home / professional grade / Root Cutter

professional grade 265 mm root cutter 4Cr13MoV Alloy Steel bonsai tools from TianBonsai

32792935467
Sold:7
Price:
$66.00
(10% OFF)
Quantity:
-
+
(90 available)
Please select the information you wantX
  • Description
  • Size Chart
  • Measurement
  • chor
  • Reviews
Specifications
Name: root cutter MTS-21
Brand: TianBonsai
Material: alloy steel (4Cr13MoV)
Quality: professional grade
Overall length: 265 mm
Surface Treatment: sanding
Edge Hardness: HRC55, quenching by the high frequency coil.
Function Detail: This root cutter have very strong and sharp blades, was designed for cutting the roots of bonsai.
Cutting Function: Cut wet branches less than 20 mm in diameter.
Professional Grade(there is a stamp mark in the handle as above picture)
Professional Grade tools, material is 4Cr13MoV Alloy Steel, handmade by professional technicians from TianBonsai.
The 4Cr13MoV Steel, it slightly inferior to 5Cr15MoV Steel, but it also the good material for the bonsai tool, contains Molybdenom, Vanadium, 0.4% Carbon and 1.3% Chromium, after quenching treatment, it's hardness is over HRC55, high intensity, strong tenacity and wear-resistant.



Precautions for the use of bonsai tools:
1. Our tools have very sharp blades. Please pay attention to the safety of users and nearby personnel when using it. Do not arbitrarily place tools on high places. If the tool is accidentally dropped, it may cause injury to personnel and tools.
2. Choose a bonsai tool of the right size. When pruning, the diameter of the branches should not exceed the cutting limit specified by the cutter, otherwise the cutter will be easily damaged.
3. Don't use bonsai tools to trim dry branches, otherwise it is easy to damage the tool blades.
4. The fine sand particles in the flower mud will damage the blade of the tool, so when using a bonsai tool to trim branches, pay attention to whether there is dirt on the branches. If there is dirt on the branches, clean them with a small brush before pruning.
5. Pay attention to protect the tool tip, even a slight frontal collision will cause damage to the tool tip.
6. Please maintain the tools after the work is completed.

Precautions for cleaning and maintenance of bonsai cutter and scissors:
1. After the work is completed, clean the sawdust and flower mud on the surface of the tool with clean water.
2. Wipe off water stains with a clean cloth and wait for it to dry.
3. Use a small amount of general anti-rust oil to drop on the tool riveting shaft.
4. Wipe off the leaking anti-rust oil with a clean cloth.
5. Store tools indoors.

Average rating:
Share your thoughts with other customers
Write a review
Product reviews can be carried out after the member login, please click here to login
TianBonsai online store in AmazonTianBonsai online store in AliExpress